Electric Gate Repair Service
Gate Safe Trained Engineers · 15+ Years Experience

Gate Servicing in Crawley

Professional electric gate servicing in Crawley, Tilgate, Worth, and Copthorne. Annual maintenance, safety checks, lubrication. Gate Safe trained. Call 07542 024681.

Professional electric gate installation in Sussex
15 Years Experience
Gate Safe Trained
£2M Insured
5-Star Reviews

Crawley's automated gates fall into two distinct categories, and each needs servicing for different reasons. The newer residential gates on estates in Maidenbower, Forge Wood, and Tilgate were installed by developers within the last decade — many with budget motors that are already showing wear. The older installations on rural properties around Worth, Copthorne, and along Turners Hill Road have been running for 15 years or more and may never have been serviced. Both need attention.

We cover Crawley from our base in Horsham, about 20 minutes away. We service residential and light commercial gates across the RH10 and RH11 postcode areas.

Servicing: £225+VAT | Free automation survey included

Call us: 07542 024681 | Book online

What a Service Visit Includes

Sliding Gate Track Inspection

Crawley has more sliding gates than most towns in the area — the narrower plots on executive estates mean swing gates are often impractical. Your engineer inspects the full track length for debris build-up, checks the guide rollers, drive gear mesh, and end stops. On the Tilgate and Maidenbower estates, grit and gravel accumulation in the track is the most common maintenance issue.

Motor and Drive Assessment

Your engineer checks motor current draw, listens for bearing noise, and inspects capacitors and contactors. On developer-installed gates across Crawley's newer estates, the budget motors fitted during construction often draw more current than they should after a few years of use — a sign that internal components are wearing. A service visit catches this before the motor fails entirely.

Safety Device Testing

Photocells, safety edges, and auto-reverse functions are tested against current standards. On properties in the rural eastern parishes — Worth, Copthorne, and along Balcombe Road — vegetation growth is the primary cause of photocell failure. Your engineer cleans lenses, tests alignment, and notes any hedge growth that needs cutting back.

Control Board Inspection

The board is checked for corrosion, loose terminals, and signs of overheating. Crawley's relatively sheltered position means less rain exposure than Horsham or Haywards Heath, but the low-lying areas around Ifield and Bewbush are prone to damp, which can affect control boxes mounted close to ground level.

Lubrication and Adjustment

All moving parts — hinges, rollers, drive gears, motor arms — are lubricated with the correct grade. Gate travel limits are checked and adjusted. Slow-down ramp settings are tested so the gate decelerates smoothly.

Why Crawley Gates Need Regular Servicing

Service Pricing for Crawley

Parts charged separately at cost if anything needs replacing.

Areas Covered Near Crawley

Also covering: Tilgate, Furnace Green, Worth, Copthorne, Maidenbower, Pound Hill, Forge Wood.

Frequently Asked Questions

How often should I service my gate in Crawley?

At least once a year for residential gates. Commercial gates near Manor Royal and Gatwick that cycle heavily should be serviced every six months. Developer-installed gates on newer estates benefit from early servicing — catching problems at the 3-year mark before they become expensive failures.

Can you service sliding gates?

Yes. Crawley has a high proportion of sliding gates and We service them regularly. The service includes full track inspection, roller checks, drive gear assessment, and motor testing.

Do you service commercial gates?

Yes. We service commercial sliding gates and barrier systems around Manor Royal and the Gatwick corridor. These need more frequent attention than residential gates due to heavy daily cycling.

My gate was installed by the developer — does it still need servicing?

Especially so. Developer-installed gates often use budget components that wear faster than commercial-grade systems. An early service visit can catch problems before they cause a complete failure, and we can advise on upgrades if the motor is not suitable for long-term use.

What does a service visit include?

Full mechanical inspection, motor and drive assessment, safety device testing, control board check, track inspection (for sliding gates), lubrication, and adjustment of travel limits. A written report is provided.

Call us: 07542 024681 | Book online | WhatsApp | All areas

Frequently Asked Questions

Need Gate Help in Crawley?

We cover Crawley and the surrounding area. Call or book online.